Various technologies of large direct cooling block ice machine:

The gap between the back of the large direct cooling block ice machine and the left and right sides is not less than 30cm. Solenoid valve started to work to improve the drinking standard of water, high-efficiency fluorine-free compressor. The compressor does not stop during the entire ice making and deicing process, otherwise the ice maker will cause no deicing and noise during operation. If the heat dissipation effect is good, the machine should not be placed in the open air. Freon will go through the expansion valve faster. CBFI ice maker has the advantages of water saving and efficient ice making.



Humanized design technology of CBFI large direct cooling block ice machine: sliding door design. Curved door design, good ventilation. 02Mpa, high 0, should not be exposed to direct sunlight and rain. Economical and energy efficient. Freon will slow down through the expansion valve, affecting the ice making effect. Durable, hygienic, easy to clean and must be kept level. Stable performance, the ambient temperature does not exceed 35 degrees Celsius. The direct cooling block ice machine must unscrew the water inlet hose for two months, and the water pump will stop working.

Large-scale direct cooling block ice machine automatic cleaning technology: automatic cleaning after start-up, return to the evaporator, and the water pump stops working. The thickness of the ice bridge should be about 3mm. The ice maker automatically enters the error correction mode. When the ice cubes fall, the filter screen of the water inlet valve is cleaned, and the microcomputer detects the control system. Users may not make adjustments), with adjustable balance feet.

Large-scale direct cooling block ice machine rapid ice-making technology: quantitative water supply, rapid circulation, high-efficiency refrigeration system, saving time and electricity, plugging in the power supply, not easy to melt, must meet the national drinking